Stacks Market V1

pool-borrow

List of Core Functions:

supply: Supplies an asset to the protocol.
withdraw: Withdraws an asset from the protocol.
borrow: Borrows an asset from the protocol.
repay: Repays a borrowed asset.
liquidation-call: Executes a liquidation call on an undercollateralized loan.
flashloan: Executes a flash loan transaction.
set-configurator: Sets the configurator address.
set-user-use-reserve-as-collateral: Sets whether a user’s reserve can be used as collateral.
init: Initializes a reserve.
set-reserve: Sets the state of a reserve.
set-borrowing-enabled: Enables or disables borrowing for a reserve.
set-usage-as-collateral-enabled: Enables or disables a reserve’s usage as collateral.
add-isolated-asset: Adds an asset to the list of isolated assets.
add-asset: Adds an asset to the protocol.
remove-asset: Removes an asset from the protocol.
remove-isolated-asset: Removes an asset from the list of isolated assets.
set-borroweable-isolated: Sets an asset as borrowable when isolated assets are used as collateral.
remove-borroweable-isolated: Removes an asset from the list of borrowable assets when isolated assets are used as collateral.
set-e-mode : activate/deactivate the E-mode.

Detailed Tables:

`supply`

Supplies an asset to the protocol.

Parameter	Type	Description
`lp`	`<ft-mint-trait>`	The liquidity pool trait reference.
`pool-reserve`	`principal`	The pool reserve address.
`asset`	`<ft>`	The asset to supply.
`amount`	`uint`	The amount of the asset to supply.
`owner`	`principal`	The owner of the asset.

`withdraw`

Withdraws an asset from the protocol.

Parameter	Type	Description
`pool-reserve`	`principal`	The pool reserve address.
`asset`	`<ft>`	The asset to withdraw.
`oracle`	`<oracle-trait>`	The oracle trait reference.
`assets`	`list`	List of asset details.
`amount`	`uint`	The amount to withdraw.
`current-balance`	`uint`	The current balance of the user.
`owner`	`principal`	The owner of the asset.

`borrow`

Borrows an asset from the protocol.

Parameter	Type	Description
`pool-reserve`	`principal`	The pool reserve address.
`oracle`	`<oracle-trait>`	The oracle trait reference.
`asset-to-borrow`	`<ft>`	The asset to borrow.
`lp`	`<ft>`	The liquidity pool trait reference.
`assets`	`list`	List of asset details.
`amount-to-be-borrowed`	`uint`	The amount to be borrowed.
`fee-calculator`	`principal`	The fee calculator address.
`interest-rate-mode`	`uint`	The interest rate mode.
`owner`	`principal`	The owner of the asset.

`repay`

Repays a borrowed asset.

Parameter	Type	Description
`asset`	`<ft>`	The asset to repay.
`amount-to-repay`	`uint`	The amount to repay.
`on-behalf-of`	`principal`	The user on behalf of whom the repayment is made.
`payer`	`principal`	The user who is making the repayment.

`liquidation-call`

Executes a liquidation call on an undercollateralized loan.

Parameter	Type	Description
`assets`	`list`	List of asset details.
`collateral-lp`	`<a-token>`	The collateral liquidity pool trait reference.
`collateral-to-liquidate`	`<ft>`	The collateral asset to liquidate.
`debt-asset`	`<ft>`	The debt asset involved in the liquidation.
`collateral-oracle`	`<oracle-trait>`	The oracle trait for the collateral.
`debt-oracle`	`<oracle-trait>`	The oracle trait for the debt.
`liquidated-user`	`principal`	The user being liquidated.
`debt-amount`	`uint`	The amount of debt to cover in the liquidation.
`to-receive-atoken`	`bool`	Whether to receive aTokens or underlying asset.

`flashloan`

Executes a flash loan transaction.

Parameter	Type	Description
`receiver`	`principal`	The receiver of the flash loan.
`lp`	`<ft>`	The liquidity pool trait reference.
`asset`	`<ft>`	The asset to be flash loaned.
`amount`	`uint`	The amount of the flash loan.
`flashloan`	`<flash-loan>`	The flash loan trait reference.

`set-configurator`

Sets the configurator address.

Parameter	Type	Description
`new-configurator`	`principal`	The new configurator address.

`set-user-use-reserve-as-collateral`

Sets whether a user’s reserve can be used as collateral.

Parameter	Type	Description
`who`	`principal`	The user for whom the setting is being applied.
`lp-token`	`<ft>`	The liquidity pool token trait reference.
`asset`	`<ft>`	The asset to set for collateral usage.
`enable-as-collateral`	`bool`	Whether the asset should be used as collateral.
`oracle`	`<oracle-trait>`	The oracle trait reference.
`assets-to-calculate`	`list`	List of assets to calculate for the collateral check.

`init`

Initializes a reserve.

Parameter	Type	Description
`a-token-address`	`principal`	The address of the aToken.
`asset`	`principal`	The asset to initialize.
`decimals`	`uint`	The number of decimals for the asset.
`supply-cap`	`uint`	The supply cap for the asset.
`borrow-cap`	`uint`	The borrow cap for the asset.
`oracle`	`principal`	The oracle address for the asset.
`interest-rate-strategy-address`	`principal`	The interest rate strategy address.

`set-reserve`

Sets the state of a reserve.

Parameter	Type	Description
`asset`	`principal`	The asset for which to set the reserve.
`state`	`tuple`	The state details of the reserve.

`set-borrowing-enabled`

Enables or disables borrowing for a reserve.

Parameter	Type	Description
`asset`	`principal`	The asset for which to set borrowing.
`enabled`	`bool`	Whether borrowing should be enabled.

`set-usage-as-collateral-enabled`

Enables or disables a reserve’s usage as collateral.

Parameter	Type	Description
`asset`	`principal`	The asset for which to set the usage.
`enabled`	`bool`	Whether the usage as collateral should be enabled.
`base-ltv-as-collateral`	`uint`	The base LTV as collateral.
`liquidation-threshold`	`uint`	The liquidation threshold.
`liquidation-bonus`	`uint`	The liquidation bonus.

`add-isolated-asset`

Adds an asset to the list of isolated assets.

Parameter	Type	Description
`asset`	`principal`	The asset to be added to the list.
`debt-ceiling`	`uint`	The debt ceiling for the asset.

`add-asset`

Adds an asset to the protocol.

Parameter	Type	Description
`asset`	`principal`	The asset to be added.

`remove-asset`

Removes an asset from the protocol.

Parameter	Type	Description
`asset`	`principal`	The asset to be removed.

`remove-isolated-asset`

Removes an asset from the list of isolated assets.

Parameter	Type	Description
`asset`	`principal`	The asset to be removed from the list.

`set-borroweable-isolated`

Sets an asset as borrowable when isolated assets are used as collateral.

Parameter	Type	Description
`asset`	`principal`	The asset to be set as borrowable.

`remove-borroweable-isolated`

Removes an asset from the list of borrowable assets when isolated assets are used as collateral.

Parameter	Type	Description
`asset`	`principal`	The asset to be removed from the list of borrowable.

set-e-mode

Activate or deactivate the E-mode.

Parameter	Type	Description
`user`	`principal`	the actual user.
`assets`	`list`	The lists of available assets in e-mode.
`new-e-mode-type`	`buff 1`	`0x00` is not in e-mode. `0x01` is in STX-correlated e-mode.